> The endstop pullups on Sanguinololu aren't on the
> board. The AVR has switchable pullups on the I/O
> pins, which is why leaving the pin disconnected
> doesn't help.
I used #define ENDSTOPPULLUPS in both my configs so it should pullup when I leave the pin disconnected. And yes the board is set to 62
> board. The AVR has switchable pullups on the I/O
> pins, which is why leaving the pin disconnected
> doesn't help.
I used #define ENDSTOPPULLUPS in both my configs so it should pullup when I leave the pin disconnected. And yes the board is set to 62