Re: Sanguinololu 1.3a, Marlin and Sainsmart lcd

RobbyG,

Thanks for providing this. It turns out that what they sent me looks like this:

[www.makershop.co.nz] (although in white, so not actually the Geeetech one)

When I look at the Sainsmart site, it has these two:

1. [www.sainsmart.com] - Sanguinololu version
2. [www.sainsmart.com] - RAMPS version

The only differences between the two Sainsmart boards seems to be the connector board. Which seems to be a "dumb" (i.e. no electornics) board. With the RAMPS one being identical to the one I was sent.

Do you have any knowledge/opinion on whether I should simply be able to manually do the wiring?

Thanks,
Craig