Re: Verification failure after upload?

Okay.

I want to clear a few things here. First, I am trying to upload the firmware. Which is a 4kb HEX file. So, according to me it should not be a problem uploading the bootloader as it is less that 64 kb.
I am aware that Usbtiny cannot upload above 64kb but then again, my device is programming the boot loader into the flash of the 1284 but there is a verification error.
I checked the size of the bootloader using "Avr-size". It comes out to be 1220 bytes.
So, i dont think that uploading the bootloader via USBtiny should be a problem.


Also, i would like to know the cause of the "Verification error"

Thanks.
Yashu