Re: Working, then not, now 7805 is hot ;(
UPDATE: So I havent gotten around to trying to upload anything via a second arduino. I have tried the following: Removing the LM7805: Didnt help at all. No connection from PC possible. nothing....
View ArticleRe: Working, then not, now 7805 is hot ;(
Another Update: I've just removed the stepper drivers from the board... the lcd now stays bright and the lm7805 no longer gets too hot. looks like they are fried.. the lcd still is not displaying...
View ArticleRe: Arduino does not show my Sanguino board
Hi, I have the same problem. How you make Arduino to see the Sanguino board on the menu? Zee, Simply copying the sanguino folder into the hardware folder does not work.
View ArticleRe: Arduino does not show my Sanguino board
If your using a modern version of the arduino IDE, its all changed see [dustsreprap.blogspot.co.nz]
View ArticleRe: Arduino does not show my Sanguino board
Dust, thanks. So, how can i do it with my arduino v1.6.x. Complicated long story?
View ArticleRe: Arduino does not show my Sanguino board
by reading [dustsreprap.blogspot.co.nz] as already said...
View ArticleRe: backup installed firmware?
QuoteRNJ I found this solution with the help of this* blog from KarlP: *[false.ekta.is] 0.For Firmware Backup and Reset goto the arduino folder where avrdude.exe is located and copy avrdude.conf...
View ArticleRe: problem with sanguinololu
Hello everybody, I know this thread is a little older, but since yesterday I have the same problem: extruders stepper won´t turn anymore. I connected the extruder stepper to x,y, and z axis and the...
View ArticleRe: MAXTEMP Error
Did anyone ever find an answer to this problem??? I'm having the same problem. It didn't start until I uploaded Marlin firmware. Every time I try to connect to Repetier, the Maxtemp pops up and I...
View Article1284P Fuse settings confirmation?
Hey all, trying to get my repstrap up and running (Sanguinololu w/ a 1284p). I'm seeing different fuse settings depending on where I look. Currently I'm set to (l,h,e) D6,DA,FD. But I've also seen...
View ArticleRe: 1284P Fuse settings confirmation?
I know when I upgraded mine I used Low 0xD6 High 0xDC Ext 0xFD I use the Gen7 bootloader the size is what they recommend on their page 1k. (It was most reliable at the time, might still be) Now the...
View ArticleRe: 1284P Fuse settings confirmation?
QuoteDustNow the gen 7 uses a crystal and the standard SL uses a resonator That's the same. On the Sanguinololu, crystal and two caps are in one package, on the Gen7 there are 3 separate parts. Here's...
View ArticleRe: 1284P Fuse settings confirmation?
So the proper settings are: DC, D7, FD Same oscillator/crystal settings as gen7 and 1024words for the bootloader? Thanks!
View ArticleRe: Arduino does not show my Sanguino board
As far as I know you can only use arduino v1.01. If the Sanguino board is not shown under the boards menue you need the boards file under the hardware/arduino folder. If you look at it with a text...
View ArticleRe: Arduino does not show my Sanguino board
Does anyone have a comprehensive set of instructions on how to burn the bootloader to the sanguino boards? There are lots of piecemeal comments but they only seem to work for a small subset of users....
View ArticleRe: Arduino does not show my Sanguino board
The instructions work fine... no idea what your doing.. I downloaded latest Arduino 1.6.9 windows.zip onto my old Windows Xp machine Extracted the zip to the desktop Ran the IDE, as expected no...
View ArticleClik here to view.
Re: Arduino does not show my Sanguino board
In regard to writing a bootloader You need some sort of avr ISP, you look to be trying to use a uno Firstly you need to turn your uno into a avr ISP following the steps 1-4 here [www.arduino.cc] The...
View ArticleRe: Arduino does not show my Sanguino board
Thanks for the detailed instructions. I have followed the steps and everything works up until the BurnBootloader command. At that point the load fails with an Access Denied to the COM port that the...
View Article